home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Magnum One
/
Magnum One (Mid-American Digital) (Disc Manufacturing).iso
/
d3
/
vde16.arc
/
VDE.REF
< prev
next >
Wrap
Text File
|
1990-12-13
|
74KB
|
1,211 lines
VDE.REF
-------
Reference Manual for the VDE Editor:
VDE 1.6 (12 Dec 1990)
(c)1987-90, E. Meyer
================================ CONTENTS ==================================
1. SYNTAX. How to invoke VDE from the DOS command line.
2. COMMAND SUMMARY: MenuBar choices; command keystrokes.
3. VDE REFERENCE, alphabetically by topic:
Auto format, Auto indent, Auto number, Auto save, Block commands,
Deleting, Files, Find/replace, Foreign characters, Graphics, Header,
Hyphenation, Indenting, Information, Inserting, Justification, Line
spacing, Margins, Matching files, Moving around, Multiple files, Page
preview, Pagination, Place markers, Printer codes, Printer drivers,
Printing, Proportional spacing, Reformat, Ruler line, Run command/shell,
Save/exit, Screen controls, Splitting files, Tabs, Time/date, Undelete,
Upper/lower case, Windows.
4. MACROS. Explanation and examples of:
Function keys, Key redefinition files, Macro definition and use, Macro
keys, Macro programming, Toggle control, Recording macros.
================================ 1. SYNTAX ================================
TO RUN VDE, you can just type "VDE", with no arguments; or, you may
specify a list of up to 8 filenames. Any filename may include a DOS
directory, and/or be followed by a mode option. A key definition or printer
driver file may also be specified at the end of the command line, following a
semicolon ";". Any spaces are ignored.
vde {filename} {/m} {, filename2 {/m}} {,...} {;name.VD_} {;name.VD_}
EXAMPLES: vde vde article.doc/w;ws4.vdf
vde sample.fil vde b:myfile,myfile.bak
vde a:summary,\recs\sep85 vde prog.doc/a,prog.asm/n,errors
"filename" - file to edit. If no name is given, you begin a new
(untitled) file. Multiple names are separated by commas; the previous
item's directory carries over to the next item, unless this begins
with a drive or root "\". (In the example above, MYFILE.BAK is on B:.)
"/m" or " m" - optional choice of file modes: "m" can be "A"SCII,
"W"ordstar, WordStar "5", Word"P"erfect, "X"yWrite/NotaBene, "M"icrosoft
Word, or "U"nformatted document; or "N"ondocument. Normally defaults to
"/A". Must be separated from filename by a space and/or a slash.
";name.VD_" - optional utility file(s) to load, must have file type
.VDF or .VDK (see KEY DEFINITION FILES) or .VDP (see PRINTER DRIVERS).
=========================== 2. COMMAND SUMMARY =============================
Explanation of Keys: special IBM PC keys are indicated in [brackets],
including arrows [^,v,<,>] for the cursor keys. [+] and [-] refer to the
keypad +,- keys only. "Esc" indicates pressing the Escape key, [Esc]; "Esc1"
means [Esc],1. "Alt" indicates holding down the [Alt] key: "AltD" means
[Alt]+D. "^" indicates holding down the [Ctrl] key: "^K" means [Ctrl]+K.
Many commands require two-key sequences, like ^QR = [Ctrl]+Q,R. The prefix
(^Q) displays in the header, and can be canceled by pressing [Esc] or [Space].
If your keyboard lacks any of the IBM PC keys, equivalents are always
available (e.g., ^R for [PgUp]). If you have no [Alt] key, you can still
access the Alt-commands with a double-Esc prefix: Esc,Esc,X = AltX. (This
also allows use of VDE while Alt-keys have been redefined with TSR utilities.)
SPECIAL KEYS
[Ret] = Carriage Return (also known as [Enter], CR, or ^M).
New line. In documents, marks a paragraph end.
[BkSp] = BackSpace (also known as BS or ^H). [May instead delete.]
[Tab] = Hard Tab mode: enter Tab. Variable Tab mode: move to next stop.
Shft[Tab] = backward variable Tab: move to previous stop.
[Del] or ^[BkSp] = delete character to left. [May instead delete at
[Ins] = toggle Insert mode on and off. cursor.]
[^], [v], [>], [<] (arrow keys) = move cursor.
^[>] = move to start of next word right.
^[<] = move to start of previous word (left).
[5] = make current line center of screen. (Keypad key, NumLock off)
^[^] = make current line top of screen. (Enhanced keyboard only)
[-],[+] = scroll back, forward one line. (Keypad keys, NumLock off)
[PgUp],[PgDn] = page back, forward one screen.
^[PgUp],^[PgDn] = page both windows back, forward.
[Home],[End] = go to top, bottom of screen.
[May instead be set to move to beginning, end of line.]
^[Home],^[End] = move to top, end of file.
MENU-BAR MODE
Press [Esc] to call up the main menu bar; select a sub-menu by typing the
capitalized, highlighted letter, then select a command from it. The [Esc] key
can be used to return to the main menu, or (from the main menu) to return to
editing. For explanation of any selection, look up its command equivalent.
{Delete: del Line} ^Y {Misc: enter Time} AltT
to line Start} ^Q[Del] " Date} AltD
" End} ^QY file Info} ^KI
del to Char} ^QT about VDE} AltI
del Block} ^KY Escape} Esc
Undelete} ^U Command mode} Esc?
{moVe: Find} ^QF {Print: overstrike Char} ^PH
Replace} ^QA " Line} ^PM
rEpeat f/r} ^L Formfeed} ^PL
Overview bar} AltO Tab} ^PI
place Set} ^PZ Graphic} AltG
" Go} ^QZ Driver} AltV
Print file} ^KP
{Text: margin L} ^OL {Block: Begin} ^KB
" R} ^OR End} ^KK
Mrgn rel} ^OX Unmark} ^KH
Justify} ^OJ Copy} ^KC
Center} ^OC Move} ^KV
Flush} ^OF cuT} AltC
rEform} ^B Paste} AltP
auto Indent} ^OA Write} ^KW
" fmT} ^OM Zoom} ^KZ
{stYle: Underline} ^PS {File: rEname work} ^KE
Bold} ^PB Dir} ^KF
Doublestrike} ^PD Read in} ^KR
Italic} ^PY Load new} ^KL
Subscript} ^PV Add file} AltL
suPerscript} ^PT Next file} AltN
Prev " } AltB
{Set: tab Set} ^OI
" Clr} ^ON
Varitab} ^OV {Exit: Save to disk} ^KS
Double spc} ^OS eXit w/save} ^KX
Prop spc} ^OK Quit w/o save} ^KQ
Hyphens} ^OH Run DOS command} AltR
pg Length} ^OP
{sCreen: make Top} ^OE {User: Ruler} ^OT
Window} AltW ...}
Other win} AltF [This and the other four items
Header} ^OQ on the User bar are redefinable.]
Blank} ^OZ
Preview} ^OD
50/43 Ln} AltE
132 Col} AltA
COMMAND MODE
A concise HELP MENU is available in Command mode by pressing ^J or [F1],
and then A,E,K,O,P,Q for Alt, Esc, ^K, ^O, ^P, and ^Q commands.
I. CONTROL KEYS: single keystroke commands.
WordStar arrow-key diamond:
^E = up. ^D = right. ^F,^A = move to word right, left.
^X = down. ^S = left.
^W,^Z = scroll back, forward one line.
^R,^C = page back, forward one screen.
^G = delete character at cursor. ^Y = delete current line.
^T = delete word to right.
^U = undo last deletion (character, word, line, or block).
^V = toggle Insert mode on/off. ^N = insert [Ret] (break line).
^] = toggle Word Insert on/off. ^_ = insert a space.
^P = insert special code: ^PZ = place mark
^P- = soft hyphen ^P# = numbering marker
^PB,D,S,Y,T,V,A,N,Q,W,E,R = print toggles and switches.
^^ = toggle case (upper/lower) of character at cursor.
^B = reformat paragraph. ^L = repeat last find/replace.
II. FILE AND BLOCK COMMANDS: first press ^K, then the key shown.
^KI = file/memory Information. ^KP = Print the text.
^KF = disk File browser. ^KR = Read a file into text.
^KL = Load new file(s) to edit. ^KJ = delete a disk file.
^KE = rEname current work. ^KS = Save to disk, and continue.
^KD = Done: save & load new file. ^KX = eXit: save & quit to DOS.
^KA = set Autosave interval. ^KQ = Quit to DOS, abandoning file.
^KB = mark start of a Block. ^KK = mark end of a block.
^KH = unmark the block. ^KY = Delete the marked block.
^KC = Copy block at cursor location. ^KV = moVe block to cursor location.
^KZ = Zoom into the marked block. ^KW = Write block to a disk file.
^K# = automatically number items in the block.
^K",',^ = uppercase ("), lowercase ('), or switch case (^) of block text.
III. QUICK COMMANDS: first press ^Q, then the key shown.
^QS,^QD = go to beginning, end of line.
^QE,^QX = go to top, bottom of screen.
^QR,^QC = go to top, end of file.
^QB,^QK = go to beginning, end of block.
^QL,^QN = go to last, next page. ^QI = go to specified page or line.
^QZ = go to next place marker.
^QP = go to Previous position in file (before last sizable move).
^QF = find a string. ^QA = find and replace a string.
^QY = delete from cursor to end of current line.
^Q[Del] = delete from cursor to beginning of current line.
^QT = delete up to specified character.
IV. ONSCREEN COMMANDS: first press ^O, then the key shown.
^OR,^OL = set Right, Left margin. ^OX = toggle Margin Release on/off.
^OC = Center current line. ^OF = make line Flush right.
^OQ = header display on/off. ^OT = ruler line display on/off.
^OB = hard CR display on/off.
^OD = page preview (control codes hidden, pagebreaks displayed)
^OA = Auto indent on/off. ^OM = auto forMat on/off.
^OG = paraGraph indent.
^OH = Hyphenation on/off.
^OK = proportional spacing on/off. ^OS = double Spacing on/off.
^OV = tab mode hard/Variable.
^OI,^ON = set, clear variable tab stop(s).
^OP = set page length (0 turns off pagination).
^OE = make current line top of screen.
^OW = split Window to show two different portions of the file.
^OZ = temporarily blank the entire screen.
V. ALT-KEY COMMANDS: press [Alt] and the key shown.
(Or [Esc] twice, then the key shown)
AltI = show VDE version Information.
AltL = Load an additional file. AltB = move Back to previous file.
AltW = split Window with 2 files. AltN = move forward to Next file.
AltF = move to other File in window.
AltC,P = Cut and Paste a block from one place or file to another.
AltM = Match up the two files on screen, showing differences.
AltX = eXit (^KX) from all files. AltQ = Quit (^KQ) from all files.
AltR = Run DOS command (or shell). AltS = Split up a large file.
AltT,D = enter the current system Time or Date in the file.
AltG = enter an IBM Graphics character into text.
AltE,A = EGA/VGA screen (43/50 lines), wide screen (132 columns).
AltO = move with Overview bar. AltV = change printer driVers.
AltU = Use (load or save) macro/function key file or printer driver.
VI. ESC-KEY COMMANDS: first press [Esc], then the key shown.
(In MenuBar mode, access via {Misc:Escape}.)
Esc[Tab] = variable tab forward (even in hard tab mode).
Esc[<],[>] = shift screen horizontally 32 columns.
Esc[^],[v] = shift screen vertically 1/4 screen.
Esc? = switch to MenuBar mode. (In macro mode: call up MenuBar.)
Esc[ = define a macro string of commands.
Esc" = record a macro from keystrokes.
Esc] = store macro on alphanumeric key for later recall.
Esc0...Z = use stored key. (In macro mode: jump label.)
Esc!,=,~,$ = jumps and loops, used in macro programming (see MACROS).
Esc* = universal toggle set.
Esc(),+,- = counter, used in macro programming.
Esc; = brief pause, during macro execution only.
Esc& = chain to another macro.
=========================== 3. VDE REFERENCE ===============================
AUTO FORMAT (^OM) - When on, continuously keeps the paragraph of text you are
working on properly formatted (margins and spacing), even as you add to or
delete from the line. If off, the manual ^B command can still be used
(see REFORMAT). [Default status can be changed.]
Care must be taken in files with mixed formats, as the CURRENT
settings of margins and spacing are always used.
Note that with Auto Format on, certain keystrokes may have additional
(or no) effects, due to the instant reformatting afterward.
AUTO INDENT (^OA) - When on, wordwrap or the [Ret] key will cause the cursor,
upon moving to the next line, to indent to match any existing indentation
on that line (with insert OFF) or the previous line (with insert ON).
Thus any structured indentation you create is maintained. Useful as a
temporary (paragraph) indent, or for outlines, program source code, etc.
Works in all modes, including non-document. Note: Indentation must be
done with spaces or variable tabs, NOT with hard tabs.
AUTO NUMBER (^P#,^K#) - ^P# inserts a marker (a highlighted "#") in the text
to stand for a sequential number in a list, for example:
#. First item.
#. Second item...
You can then mark the list off as a block (see BLOCK COMMANDS), and use
the ^K# command: VDE will insert the numbers (1, 2, etc) in place of the
markers. You will be asked for the starting number; the default is of
course 1. (Once this is done the markers are gone. For frequently
revised lists, leave the ^P# markers in the file on disk; use ^K# just
before printing, and do not save afterward.) If auto format (^OM) is on,
text will be realigned to compensate for varying length numbers.
AUTO SAVE (^KA) - When on, VDE saves any changes you have made to disk
automatically, at regular intervals. This ensures that you don't lose too
much work if you make a mistake, have a power outage, etc. ^KA lets you
set the interval (1 to 255 minutes), or turn this feature off entirely
(0). Just press [Ret] to restore the default, normally 0. [This can be
changed with VINST.]
Notes: Auto save does not act on a file during intervals when the
keyboard is not in use, or while you are editing another file. It cannot
save untitled files.
BLOCK COMMANDS (^KB,^KK,^KH,^KZ,^KY,^KC,^KV,^KW; ^QB,^QK; ^KPB) - A block of
text is delimited by two markers, set by ^KB (beginning) and ^KK (end),
which remain in place until reset elsewhere or deleted. ^KH unmarks the
block, removing any marker(s). The block operation commands all require a
block to be marked first:
^KY goes to and deletes the block (including markers). (If you want
to return the cursor to its position before the deletion, type ^QP.)
^KV moves the block (including markers) to the present cursor
location; ^KC simply copies it, leaving the original marked. Any place
markers present are not transferred. (The cursor cannot be IN the block.)
^KZ "zooms into" a block: the rest of the text is hidden, and the
block is temporarily treated as the entire file. This can simply isolate
one portion of a file for your attention; it can also be done to limit the
scope of many VDE commands (^QA, ^B, ^KI...) to that portion. Use ^KZ
again to zoom back out. In zoom mode: pagination is off; you CAN use
block operations, though any block markers within will disappear when
zooming back to the whole file; if you save (^KS), VDE will automatically
zoom back out of the block first.
^KW writes the block text to a disk file; you will be asked for the
filename (and optional mode). Normally this will overwrite any existing
file; however, you can choose instead to append the text at the end of the
file, by typing a "+" before the filename:
Write to file: GORT overwrites
+GORT appends
^QB, from wherever you are in the file, moves the cursor to the block
start; ^QK moves to the block end.
^KPB (^KP with B option) prints the block text only. (See PRINTING.)
DELETING (^G,[Del],^T,^Y; ^QY,^Q[Del],^QT) - ^G deletes the character at the
cursor. Normally, as in WordStar, [Del] deletes the one to the left, and
[BkSp] (^H) moves left without deleting. [Instead, [BkSp] may be instal-
led to delete to the left, and [Del] at the cursor.]
^T deletes a word to the right (everything from the cursor to the
next word break.)
^Y deletes the entire current line. ^QY deletes the part of that
line to the right of the cursor; ^Q[Del] deletes the part to the left.
^QT, followed by a character, deletes everything until the next
occurrence of that character. (If the undelete buffer fills before one is
found, it will report "Not Found".) EXAMPLE: ^QT. (period) deletes to the
end of the sentence. Special case: ^QT^M ([Ret]) deletes to the next HARD
CR, the end of the paragraph.
Unintended deletions can be recovered (see UNDELETING).
FILES (^KL,^KR,^KJ,^KF) - ^KL loads new file(s) to edit, REPLACING the
current one. (If the file has been modified, you will be prompted to
confirm that you mean to abandon it; if you want to load file(s) in
ADDITION to the current one, use AltL instead.) You may enter either a
single filename or a list delimited with commas (see SYNTAX).
^KR reads in the contents of a disk file, inserting the text at the
current cursor position.
^KJ deletes any disk file you specify. (If you need more complex
file utilities, remember that you can run any DOS command with AltR.)
All these commands prompt for specific filenames. If you are unsure,
or would rather see a directory first, you can call up the FILE BROWSER by
pressing [Ret] alone for *.*, or typing a filename with wildcards, like
*.LET. (Note: if you want to leave the new file untitled, press ^J or
^[Ret], instead of [Ret], at the ^KL prompt.)
The file browser can also be called up directly with ^KF. You may
specify a directory and/or filename mask, and the files will be
alphabetically listed. (The default, if you just press [Ret], is the
directory shown, and all files *.*.) Files display alphabetically in
uppercase, then directories in lowercase. If there are more items than
will fit on screen, you will see "..." to indicate this; the display will
scroll as needed when you move the cursor. [Note: display of .COM, .EXE
and other such files can be suppressed.]
To remove the display, press [Esc] or [Space]. But while it is on
screen, you may also select one of the files shown, by moving the cursor
to it with the arrow keys. Then, you can press:
[Ret] to load this file in place of the current one (see ^KL);
L to load it as an additional file (see AltL);
R to read it into the current file (see ^KR);
^Y to delete this file (be careful; deletion is immediate).
If the file you want to load/read requires a different file mode, you can
first press "/" and the correct mode letter (A,U,N,W,5,P,X, or space).
You may also select a directory, in which case you can press:
[Ret] to view its contents in turn;
^Y to remove it (if empty).
FIND/REPLACE (^QF,^QA; ^L) - ^QF is the command to FIND a string. The search
normally proceeds from the cursor position forward, and is case (upper-
lower) sensitive. The character ^_ (Ctrl-underline) functions as a
wildcard: it will match any single character. The single code ^M (CR, or
[Ret]) indicates a "newline" in VDE. Some control codes can be entered
directly; some (like ^M) require the ^P prefix. Graphics characters can
be entered using AltG. Examples:
Find: ^MLABEL matches "LABEL" at start of line only;
Find: p^_^_ce matches "piece", "peice", etc.
^QA is the REPLACE command. It asks for a string to find, as above,
then what to change it to. Normally, the cursor will move to each
occurrence of the string, and you will be asked ("Chg?") whether to change
it; answer "Y"es or "N"o, or "*" to change all the rest without asking, or
press [Esc] to quit.
There are several options for find/replace:
"B" = search Backward through the file;
"U" = case insensitive search (ignore Upper/lower distinction);
"G" = search Globally (from start or end of file);
"A" = Align (reform) paragraphs again after each replacement;
"N" = No query: replace all instances without asking.
To skip the options prompt, finish entry of the find string (for ^QF) or
replace string (for ^QA) by typing ^J or ^[Ret] instead of [Ret].
Notes: "A"lign is assumed by default if auto format (^OM) is on.
(Be careful about mixed format files in this situation.) "N"o query is
assumed whenever ^QA is used in a macro. ["U"ppercase can be set as your
default, in which case pressing "U" means case sensitive.]
^L quickly repeats the last ^QF or ^QA operation. For ^QA, you will
be asked whether you want to replace the found string. In both cases, the
"B", "U", and "A" options remain as last specified.
FOREIGN CHARACTERS - Characters in the upper ASCII range (128-255), such as
the foreign letters and accents, can be entered directly into text using
either standard DOS method: one of the DOS KEYBxx keyboard map utilities,
or the [Alt] key and numeric keypad (with [NumLock] on, hold down [Alt]
while pressing 1,5,5 for character 155).
VDE treats these characters as "graphics": you are limited to a total
of 32 such codes at a time, and any that you have used may be found in the
menu brought up by the AltG command. See GRAPHICS.
GRAPHICS (AltG) - You can enter an IBM graphic (or foreign) character into
the file either directly from the keyboard, via [Alt] and the numeric
keypad, or with the AltG command. You will be presented with a menu of up
to 32 characters (labeled A-Z,1-6) to choose from; the default set
contains some useful box drawing parts, and has room free for other
characters that might be loaded. [It can also be modified with VINST.]
Any open menu entry can be defined on the spot. Type "=", then the
code (A-6) to change. You can then select the desired character from the
complete graphics set, by moving the cursor to it and pressing [Ret].
Alternatively, if you press [Esc], you may enter the extended ASCII code
in either hex (2 digits 80-FF) or decimal (3 digits 128-255) format.
Example: the Greek alpha can be entered either as "E0" hex or "224"
decimal. Once defined, the graphic can be entered into the file by
pressing its menu letter; its definition cannot be changed again during
the same editing session.
NOTE: In addition to the 128 graphics characters, the code ^Z (hex
1A, decimal 026) may only be entered as a graphic. (^PZ embeds not ^Z but
a place marker.) Furthermore, several codes in the range 00-1F,7F (000-
031,127) are reserved for internal use; though they can be entered with
^P, they will be represented as graphics.
CAUTION: If you load a file containing many graphics (or binary data
that will be interpreted as graphics), VDE will try to add each in turn to
its table. If the graphics table fills up, any further graphics will be
replaced by duplicates of graphic #6. You will see an error message, and
the file will become "untitled", to guard against saving to disk and
corrupting the file. If you frequently work with graphics characters you
will want to keep your default table relatively empty to avoid this.
Graphics are stored in disk files in accord with the current file
mode. Printing of graphics depends on whether your printer font is
installed [see PRINTER INSTALLATION] as IBM graphics (PC8) or Roman8, or
neither, in which case VDE will "emulate" them, choosing standard ASCII
character overstrikes that come as close as possible. This usually works
well, especially for the foreign language characters.
HEADER (^OQ) - The "header" at the top of the screen can be toggled on and
off with ^OQ. [The default can be set either way.] It looks like this:
-----------------------------------------------------------------------
+ VDE.DOC /A P 14 L 11 C 48 Ins vt hy AI DS J+ PS " ^K_
or (NP/BZ) (WIn) (AF) (MR)
-----------------------------------------------------------------------
'+' = Multi-file flag. Present if other file(s) are being edited.
'VDE.DOC /A' = Current filename and mode. The full drive and path
information, along with other files being edited, can be displayed
with the ^KI command (see INFORMATION).
'P 14, etc' = Cursor position in file by page (in document modes), line,
column. If pagination (^OP) is off, you will see 'NP'; in block zoom
(^KZ) you will see 'BZ'.
'Ins','WIn' = Insert mode (^V) or Word Insert (^]) on.
'vt' = Variable Tab mode (^OV) on.
'hy' = Hyphenation (^OH) enabled. Doesn't display in /N mode.
'AI' = Auto Indent mode (^OA) on.
'AF' = Auto Format mode (^OM) on.
'DS' = Double spacing (^OS) on.
'J+/-' = Right Justification mode (^OJ) on. Doesn't display in /N mode.
'MR' = Margins released (^OX). Doesn't display in /N mode.
'PS' = Proportional spacing (^OK) on.
" = Double quote mark appears during macro recording (Esc").
'^K_' = Command key prefixes (and some prompts) display here.
HYPHENATION (^OH,^P-) - ^OH toggles hyphenation on and off. If off, midword
hyphens are not treated as wordbreaks. [The default can be changed.]
VDE can't hyphenate automatically, but it can recognize hyphens that
you type in the text, treating them as a legitimate place to break a line.
In addition to ordinary hyphens, "-", there are "soft hyphens" (SHs),
which you can enter by typing ^P- (^P,hyphen), and which display in a
different color. SHs indicate optional places to break a long word: they
will print as a hyphen when they fall at the end of the line (that is,
when actually used to break a word), but are ignored if they wind up in
mid-line. (Note: only WordStar (/W or /5) file modes store soft hyphens
as such; when saving to disk in other modes, as in printing, they either
become hyphens or disappear, as appropriate.)
INDENTING (^OG) - Of course you can indent text simply by changing the left
margin (^OL), but there are times when you want only a temporary indent.
^OG gives a "paragraph indent"; each time you use it, the left margin is
reset to the next tab stop over (see TABS). The indentation lasts until
you type the [Ret] at the end of the paragraph (or use the ^B or ^OL
commands), at which time the original left margin is restored.
See also MARGINS, AUTO INDENT.
INFORMATION (^KI,AltI) - ^KI displays an Information message telling you:
The full name (including directory) of the current file;
When it was last saved, and whether (Y/N) it has been changed since;
Any print toggles (^B,D,S etc) that seem to be mispaired;
A word count for document files (useful for professional writing);
The current size of the file in bytes or K (1K = 1024 bytes);
The number of bytes of memory used and free in this text segment;
The amount (in K) of memory free to edit further files;
The names of all other files being edited.
The AltI command displays the VDE version, date, and copyright. (An
uninstalled copy of VDE does this automatically on startup.)
INSERTING (^V,[Ins],^],^_,^N) - ^V or [Ins] toggles Insert mode on/off, and
^] toggles Word Insert. When both are OFF, VDE is in overwrite mode: any
text to the right of the cursor is replaced as you type. With Insert (^V)
ON, any existing text is instead carried to the right. With Word Insert
(^]) ON, you can type over the letters of a word, but anything you add at
the end of the word (when the next character is a space) is inserted
without overwriting; this is a handy feature for revising text. [The
default insert status can be changed.]
The ^_ and ^N commands (insert space, CR) are most useful in
Overwrite mode (avoiding the need to turn Insert on and back off).
JUSTIFICATION (^OJ) - ^OJ controls right justification mode, cycling between
three states:
ADD. ("J+" in header.) Text paragraphs will be
formatted with an even right margin, by inserting extra
spaces between words as necessary.
REMOVE. ("J-" in header.) Formatting will undo
justification by removing any extra spaces between words,
leaving an uneven right margin again.
OFF. Formatting does not change spacing of text;
right margin is left uneven.
Thus the Reform (^B) command can justify or de-justify text as desired.
Right-justified text should not be saved to disk in file mode /U
(which has no margin structure) or in modes /X, /M, or /P (because
XyWrite, MS Word, and WordPerfect will not recognize VDE's method of
justification).
Justification does not operate with proportional spacing (^OK).
LINE SPACING (^OS) - ^OS toggles between single and double line spacing. In
double space mode, the following functions generate double carriage
returns: [Ret] (^M), Insert CR (^N), Reform (^B), Wordwrap. You can
easily mix single and double spacing; ^B can convert between the two.
Note: a single-spaced file can also be printed out double-spaced with
the "D" option of the ^KP command (see PRINTING).
MARGINS (^OR,^OL,^OX,^OC,^OF) - ^OR sets the Right margin, and enables text
formatting. At the prompt, enter the column number (up to 255), or just
press [Ret] for the current cursor column. (Note: in proportional mode
(^OK), the number is interpreted in 1/10" instead of characters.)
^OL similarly sets the Left margin column; the value must be less
than the right margin. (^OL is normally used for indenting selected
paragraphs. To leave blank space at the left of the page throughout when
PRINTING, see the "L" option of the ^KP command, and the left margin
setting in PRINTER INSTALLATION.)
"Wordwrap" is automatic in all document modes whenever the margins
are set: anything typed before the left margin will move up to it;
anything typed past the right margin will wrap over to the next line.
(See also REFORMAT and AUTO FORMAT.) Wordwrap and formatting are disabled
if the right margin is set to 1, or while margins are released (^OX).
(NOTE: Margins cannot be set in /N (nondocument) mode; a left margin
cannot be set in /X, /U, or /M mode.)
^OX toggles margin release, allowing you to type outside them.
^OC Centers the current line with respect to the margins; ^OF sets
the line Flush right. The cursor advances to the next line.
MATCHING FILES (AltM) - This command can locate small differences between two
largely similar files (perhaps an earlier and a later revision of your
work). You must first load these two files (AltL), then split the screen
between them (AltW), and position the cursor on corresponding lines in
both files (for example, the top).
Then press AltM. Starting from these positions, VDE searches for any
difference between the files. If there is one, VDE will stop on those
lines, showing the disagreeing passages side by side. If you want to
continue, press AltM again. (If the difference was significant you may
first need to reposition one cursor to match the other.) If the cursor
winds up at the end of both files, they match.
Note: in document modes, AltM compares word by word, ignoring mere
formatting differences (margins, spacing etc). In /N mode, it is an exact
character by character comparison.
MOVING AROUND (Arrows; ^F,^A,^C,^R; ^QE,X,S,D; ^QR,C; ^QI,^QL,^QN,^QP; AltO) -
VDE supports two sets of Arrow keys, which function interchangeably: the
four arrow keys [^,v,<,>] on the IBM keyboard, and the WordStar "diamond"
^E,^X,^S,^D. These keys move the cursor one unit up, down, right, and
left respectively. There are many other movement commands as well:
^F or ^[>] moves right, to the start of the next word; ^A or ^[<]
moves left, to the start of the current (and then previous) word. ^C or
[PgDn] scrolls forward (down) one screen; ^R or [PgUp] scrolls backward
(up) one screen.
Preceded by ^Q, any arrow key moves more Quickly: thus ^QE, ^QX go
to the top or bottom of the screen; ^QS, ^QD to the left or right end of
the line. Similarly, ^QR and ^QC scroll all the way to the beginning or
end of the file, respectively.
^QI moves directly to a given page (for documents) or line (for non-
documents). In documents, ^QL and ^QN move to the start of the Last or
Next page, respectively.
^QP returns the cursor to its Previous position -- before the last
large movement occurred. (This means AltO,^B,^QR,^QC,^QF,^QZ,^QB,^QK, and
any other block command that moves to the block location via ^QB.) ^QP
can be used again to cycle between these two positions in the file.
AltO displays an Overview bar at the top of the screen. The length
of the bar corresponds to the filesize, and the current position is marked
so you can see where you are. You can move the place marker left or right
with the arrow keys; the cursor remains in the original (current)
position. To move to the selected position, press [Ret]; press [Esc]
instead to cancel.
MULTIPLE FILES (AltL,AltB,AltN,AltX,AltQ,AltC,AltP) - VDE allows you to edit
up to 8 files simultaneously, if you have enough memory. This can be done
from the command line, by giving the filenames separated by commas.
Otherwise, to Load additional files, press AltL. You may specify a
single filename, or a list delimited with commas (see SYNTAX); for an
untitled file, press ^J or ^[Ret]. You can also access the file browser
with [Ret] or wildcards (see FILES). (You will get an error message if
you run out of memory, or are already editing the named file, or 8 files.)
Once multiple files are in use, AltB and AltN can be used to cycle
back and forth through the files being edited. If you Quit or Exit
(^KQ,^KX) from one file, you will be returned to the previous one.
For convenience, AltX exits ALL files immediately, saving any changes
made. AltQ quits ALL files immediately, without saving; if any of them
have been modified, you will be prompted (just once) to confirm this.
AltC Cuts a marked block of text, placing it in a buffer for later
recovery. (The original remains, unless you delete it with ^KY.) AltP
Pastes in the previously cut text at the cursor position, allowing block
copying and moving between files.)
It is possible to view two files on screen at once (see WINDOWS).
PAGE PREVIEW (^OD) - This command shows you a preview of the text as it would
print: with all non-printing codes (markers, ^P codes, etc) hidden, and
page breaks indicated by a row of dotted lines. This is handy for making
sure that text is aligned properly. You can scroll through the file in
this mode with [PgUp,Dn] or ^R,^C; or move to the top or bottom, with
^[Home,End]. Press [Esc] to continue editing.
PAGINATION (^OP,^PL) - The ^OP command sets the page length. Enter a value 0
to 255 lines, or just press [Ret] to restore the default. [Normally 56.]
When the value is nonzero, it determines the page and line shown in
the document header ("P xx L xx"), and all page functions in the Print
routine (pagination, headers, start/stop at page) are enabled. A formfeed
will be sent to eject each page. [VDE does not send a formfeed before
printing; install one in your printer initialization if you want.]
When the value is zero, pagination is off. The header will say "NP
L xxxx", showing you the absolute line number in the file; printing
occurs with no page breaks. (This is useful for printing small things
right after each other on the same sheet; or, in conjunction with the "*"
option, multiple copies of index cards, labels, etc.)
The ^PL command embeds a formfeed (^L) in the text, to begin a new
page; the best place to put it is at the end of a line.
PLACE MARKERS (^PZ,^QZ) - You can set any number of temporary place markers
in the text with ^PZ (they display as a highlighted "Z"). The ^QZ command
moves the cursor to the next place marker in the file, cycling back to the
top of the file as needed. (Place markers are NOT saved to disk.)
PRINTER CODES (^P) - This command prefix is used to enter various "codes" in
the ASCII range 00-1F into the text, usually for purposes of printer
control. Most codes are entered in a standard fashion: ^PA embeds ^A,
etc. Those with defined functions in VDE documents display as highlighted
letters ("A" etc); others (nearly all, in non-documents) display as
graphics. It is possible to embed the code ^Z (hex 1A) in a file, but
only via AltG (see GRAPHICS), since ^PZ gives a place marker. (Use
caution; many programs treat this code as an end of file mark.)
Several common control codes produce special effects:
^P^I - hard (ASCII) tab - printers respond variously to this
^L - formfeed - will cause a page break
^H - backspace - overstrike previous character
^M - carriage return - enter a CR without a LF to overstrike line
(do NOT hit another [Ret] after this, just continue typing)
The further codes below operate only in documents.
^P^G causes printing to pause, with "^PG" in the display, until you
press [Ret] to continue. This allows you to adjust the platen for
printing various forms. (Note: on many dot matrix printers, can only be
used at the start of a line.)
In addition, in place of complex "escape sequences" for effects such
as underlining, in document files VDE lets you enter a single marker,
which will be translated into the proper codes during printing. VDE
supports a set of 13 codes for this purpose: seven toggles, six switches.
[See PRINTER INSTALLATION on how to install the proper commands for your
printer. Otherwise, only ^PS and ^PX will work.] The conventional
WordStar meanings of these codes are:
Toggles: ^P^B boldface Switches: ^P^Q (user def 1)
^D ("doublestrike") ^W (user 2)
^S underline ^E (user 3)
^Y italic ("ribbon") ^R (user 4)
^T superscript ^A alternate pitch
^V subscript ^N standard pitch
^X strikeout [has no installation]
But you can use them for anything you like. "Toggles" are good for
features like underlining that are turned on and off; enter them in pairs,
to mark the beginning and end of the desired text. "Switches" are better
for multi-valued parameters like character pitch; enter them once.
If toggles are not properly paired, you will find print effects
continuing throughout the rest of your document. To save time and effort,
use the ^KI command to check for this before printing. (If an "S" appears
under the "^Check" heading, there is an unpaired ^S somewhere.)
PRINTER DRIVERS (AltV,AltU) - Since many people use more than one kind of
printer, VDE accomodates two different printer drivers, a primary and an
alternate. Before printing a file, you can select which one is active
using AltV. [You can change both drivers with VINST.]
AltU gives you access to an unlimited number of further printer
drivers in the form of .VDP disk files; select "L"oad, then type the file
name. [See PRINTER INSTALLATION for instructions on how to create such
files.] The new driver will replace the previous primary.
PRINTING (^KP) - The ^KP command Prints the file from memory. You will be
asked for a set of "Options:", at which point you may enter one or more of
the following, in any order:
'...' sends a string of printer control commands before printing
begins. These must be entered in ASCII format: type in the ACTUAL
characters or control codes. If the command is "Esc A" (1B 41
hex), type "Esc","A". (For control codes, 01 = ^A, 02 = ^B, etc.
Some will require the ^P prefix: 00 (^@) = ^P@, etc. You may
find an ASCII table helpful; see PRINTER INSTALLATION.)
Tnn sets a TOP MARGIN skip of nn lines. [The default margins can
Lnn sets a LEFT MARGIN skip of nn columns. be set with VINST.]
D DOUBLESPACES the printout.
^ FILTERS control codes (like ^X) so they print out as text "^X".
*nn prints the entire job out nn TIMES (nn=1...255).
P PAUSES for your keystroke before each page prints (sheet feed).
B prints only the currently marked BLOCK.
(FILENAME) redirects printer output to a disk file. All print
control codes will go into the file just as they would have been
sent to your printer. If you want to append the output to an
existing file, type a "+" before the name: (+FILENAME).
N NUMBERS pages sequentially, at top right.
C numbers pages at bottom CENTER.
"..." uses the quoted string as a HEADER. The string will print at
the top right unless it begins with a "<" character, in which case
it prints at the left. (Maximum length is 50 characters.)
Note: you can include the current Filename, Time or Date in the
header simply by entering ^F, ^T, or ^D, respectively.
S SUPPRESSES the header/page number on the first page of output.
F prints FACING pages (header/number reversed on even pages).
O,E prints only Odd or Even pages (print one, then run the paper
back through and print the other, for double-sided printing).
@nn begins printing AT page nn of the document.
#nn prints only (up to) a TOTAL of nn pages.
=nn RENUMBERS the printout to start at page nn.
(The paging options (N/C,"...",S,F,O/E,@,#,=) are NOT allowed if the page
length is set to 0 (^OP), or if 'B'lock print was chosen. 'C' cannot be
used together with 'N'.)
EXAMPLE 1: Options: "<STATUS REPORT: ^D" N F
will put a header like "STATUS REPORT: 10/19/90" at the top left of each
page, and the page number at the top right (vice versa on even pages).
EXAMPLE 2: Options: L12 #1
will print one page only, with an added left margin of 12. (Printing a
single page is a good check of page layout before going ahead to print a
long file. To continue at page two, of course, use Options: @2.)
EXAMPLE 3: Options: BD(+SCRATCH)
will append the print output of the current marked Block, double spaced,
to the disk file SCRATCH.
NOTES: The left margin setting (via "Lnn" or VINST) is in columns,
and its physical width will vary according to the font in use. If you
need a fixed margin, it is better to find your printer's Esc command for a
left margin setting in inches or dot columns, and add this to your printer
initialization string.
If you are in /W or /5 file mode, any WordStar dot commands in the
file (lines beginning with ".") will not be printed.
You can abort printing at any time by pressing [Esc].
PROPORTIONAL SPACING (^OK) - Normally VDE assumes a fixed pitch font: one
character equals one print column. Yet if your printer has a proportional
font, you can get VDE to use it, and to format text so that it will print
with more appropriate margins. With ^OK on, your printer will be put in
proportional mode when printing (^KP); and all wordwrap and reformatting
(^B,^OC,^OF) will take advantage of a table of varying character widths,
resulting in a better aligned printout.
In proportional mode, the right margin needs to be interpreted in
inches rather than characters; VDE assumes 10 cpi for convenience, so that
a right margin (^OR) of 70 means 7.0". (Note: lines may well extend
beyond the 70th column on screen.)
[See PRINTER INSTALLATION to install codes for proportional mode on
your printer, and CHARACTER WIDTHS to adjust the width table.]
REFORMAT ([Ret],^B;^OB) - In documents, pressing [Ret] creates a "hard CR"
marking the end of a paragraph. (This is a CR without a preceding space;
wordwrap creates a temporary "soft CR", preceded by a space. See TEXT
FORMATTING.)
^B reformats the paragraph the cursor is in according to the
current margin settings and line spacing. (Thus ^B is used not only to
reshape a paragraph after editing, but also to change its format in
various ways: see MARGINS, JUSTIFICATION, LINE SPACING.) If the top line
is indented relative to the next one, VDE preserves that as paragraph
indentation. To reformat an entire file use the MACRO command (Esc[) to
repeat ^B. (See also AUTO FORMAT.)
^OB toggles display of hard CRs, which are normally marked by a left-
arrow character in document files, to distinguish them from soft ones. If
you find this distracting, it can be turned off.
RULER LINE (^OT) - To help you align text properly, ^OT displays a "ruler
line" above the text. Type ^OT again to remove it. A moving pointer
indicates the current column.
In each column you will see one of several symbols: the arrow "v" is
the cursor column; "L,R" designate the current margins; "." indicates
areas outside the current margins, "-" within them. Also, tab stops are
marked by either "!" (Variable) or ":" (Hard). Examples:
(/A mode) L-----!---!----------v--!--------------R........
(/N mode) :.......:.......:....v..:.......:.......:.......
RUN COMMAND/SHELL (AltR) - AltR lets you run DOS commands without leaving
VDE. An imitation DOS prompt is produced (e.g., "C:\WORK>"); you can copy
or rename files, or run any other program you like, and afterwards VDE
will prompt you to "Press [Esc]", which will return you to your undis-
turbed VDE editing session.
In addition, you may type "SHELL", which lets you out into what is
known as a Command Shell: you are actually back IN DOS, and can use any
number of commands or move around as you like; when through, you need to
type the DOS command EXIT to leave the Shell.
To use AltR, you must have enough free memory to load and run the
chosen program; and VDE must be able to find COMMAND.COM in order to
execute it, which it does by checking the COMSPEC environment variable.
Be sure your AUTOEXEC.BAT file includes a line like
SET COMSPEC=C:\COMMAND.COM.
(Caution: don't load new memory-resident utilities from within the
AltR command; this fouls up the DOS memory allocation.)
SAVE/EXIT (^KE,^KS,^KX,^KD,^KQ) - ^KE renames your work, allowing you to
change the filename in the header before saving. (Accepts mode option;
you can also specify a mode alone, "/W", simply to change the current
mode.) Note: if you want to make the file "untitled", press ^J or ^[Ret],
instead of [Ret], at the ^KE prompt.
^KS saves your work so far, writing the file to disk under the
filename in the header. (If it's "untitled", a new name will be
requested.) If the file has not been modified, you will be prompted to
confirm that you meant to save it again anyway.
For safety, a copy of the existing file is preserved as a BACKUP FILE
(with extension ".BAK") each time you save changes. [If you prefer not to
use BAK files, you can suppress their use with VINST.]
There are several different commands for finishing up:
^KX saves your work (if modified), and then EXITS to DOS.
^KD saves your work, then loads a new file to edit.
^KQ just QUITS, without saving to disk. If the file has been
modified, you will be prompted to confirm that you meant to do this!
SCREEN CONTROLS (^W,^Z; Esc^,v,<,>; ^OE,^OZ; AltE,AltA) - VDE provides a
number of commands affecting the screen display:
^W and ^Z scroll the screen up and down a line at a time, without
moving the cursor in the text (unless necessary).
Preceded by [Esc], any arrow key shifts the SCREEN, leaving the
cursor in place: the text view moves up/down 1/4 screen, or right/left 32
columns. (The cursor must be past column 32 to allow horizontal shifts.)
^OE makes the cursor line the top of the screen.
^OZ temporarily blanks the entire screen; good for avoiding CRT burn-
in, or just protecting work from prying eyes or fingers. Restore the
screen by pressing [Esc]. This is also useful if some other software
(like a resident utility) has messed up the screen: type ^OZ,Esc and VDE
will completely restore it.
AltE lets you see more lines of text on screen, if you have an EGA or
VGA display. It toggles between normal 25-line mode and a compressed mode
of 43 (EGA) or 50 (VGA) lines.
AltA toggles between normal (80-column) mode and wide (132-column)
mode. It can be used alone, or in combination with AltE to provide a
43/50x132 screen. [This command works ONLY with certain VGA or EGA cards
which offer 132 column displays; see INSTALLATION to specify yours.]
(NOTE: even if VDE does not support your video card, you should be
able to edit in any screen size it offers. Just use the utilities
provided with your card to set the screen size before entering VDE.)
SPLITTING FILES (AltS) - If you encounter a text file that is too large for
VDE to load and edit, you can divide it into manageable chunks with the
Split command. You will be prompted for the file to split and a "output
name" pattern with a "#" in it, to name the resulting pieces. Example:
Split file, output name (w/#): HUGE.DOC, PIECE.#
This will go through the file HUGE.DOC and write out a series of smaller
files PIECE.1, PIECE.2 etc, which can then be edited. (You can tidy up
the transitions between them with Cut and Paste, if you like.)
Note that the output name must be separated from the input by a
comma, and must contain one # sign, which will be replaced by a 1, 2, etc
in sequence. (The above example could have used HUGE-#.DOC, etc.)
TABS ([Tab],Shft[Tab]; ^OV,^OI,^ON; ^PI,Esc[Tab]) - There are two Tab modes,
Variable and Hard; ^OV toggles between them. In Hard Tab mode the Tab key
produces an actual ^I (ASCII TAB) character. Hard Tabs display at fixed
intervals [normally 8 columns; optionally 4 or 16].
In Variable Tab mode (the default for documents), the Tab key moves
to the next tab stop set. The cursor moves over any existing text; spaces
are added at the end of a line if needed.
Up to eight tab stops may be set with ^OI, or cleared with ^ON; the
defaults are in columns 6, 15, 35, and 55. [These can be changed.] Both
commands prompt for a column number, or you can press [Ret] for the cursor
column. The Set command ^OI also accepts two options, both of which
replace all previous tab settings:
@nn Set tabs every "nn" columns
#n1,n2,... Set tabs to columns "n1,n2,..."
You can simply clear all variable tabs by typing "@" or "#" alone.
The Shft[Tab] command tabs backwards (left to the previous stop),
useful for moving around in tables, etc.
You can always get a Hard Tab with ^PI, or a Variable Tab with
Esc[Tab], no matter which tab mode you are in.
TIME/DATE (AltT,AltD) - VDE can read the DOS system clock and insert the
current time and date in your file automatically. Just press AltT for the
Time, or AltD for the Date. The string will appear at the current cursor
location, as though you had typed it in yourself: for example,
1:21 PM [or 13:21 -- VINST selects the format]
January 15, 1988 [or 1/15/88, 15 January 1988, 15.1.88]
UNDELETING (^U) - The undelete function can be used to recover accidentally
deleted text or overstruck characters. The lost text will be replaced at
the current cursor location. ^U may be used repeatedly to undo a sequence
of deletions, recovering each character, word, or line in order. (Once
all deleted text is restored, ^U does nothing.)
Exception: block deletions cannot be recovered sequentially, they
must be undeleted immediately (before any other deletion occurs).
Undeletion can also be used as a sort of quick-and-dirty block move.
For example, if the cursor is at the start of a word, the commands ^T^F^U
(which of course can be assigned to a macro key) will swap that word with
the one following it. Similarly, ^Y^X^U will swap two lines.
UPPER/LOWER CASE (^^; ^K",^K',^K^) - ^^ (Ctrl-caret or 6) reverses the case
of the character at the cursor, if it was a letter, and moves to the next.
The ^K^ (^K-caret) command reverses all text in a marked block (see
BLOCK COMMANDS); ^K" makes all text in the block uppercase, ^K' lowercase.
WINDOWS (^OW; AltW,AltF; ^[PgUp,PgDn]) - VDE can split the screen into two
windows, showing either two parts of the same file or two different files.
In either case, AltF moves the cursor back and forth between the two
windows. ^[PgUp] and ^[PgDn] scroll BOTH windows in synchronization.
^OW is used in a SINGLE file; it creates a window in the bottom half
of the screen, duplicating the current file text. You can move to a
different place in the file within this window, and continue editing, with
the original text still in view in the top window. (Note: any
modifications made to the file will not be reflected in the inactive
window until you return to it.) Type ^OW again to undo windowing.
AltW splits the screen Window between two DIFFERENT files being
edited, showing you both at once. Type AltW again to undo.
================================ 4. MACROS =================================
FUNCTION KEYS ([F1]...[F12]) - Up to 48 macros can be assigned to function
keys; they can then be recalled and used with one keystroke. Each IBM
function key can be used alone or with Shift, Ctrl, or Alt, to produce:
[F1]...[F10] = F01...F10 in VDE notation
Shift-[F1]...[F10] = F11...F20
Ctrl-[F1]...[F10] = F21...F30
Alt-[F1]...[F10] = F31...F40
And, if you have an Enhanced (101-key) AT keyboard, also:
[F11],[F12] = F41,F42 Ctrl-[F11],[F12] = F45,F46
Shift-[F11],[F12] = F43,F44 Alt-[F11],[F12] = F47,F48
VDE comes with [F1] set as a "Help" key (^J), but this can be changed.
Otherwise, function keys are defined (with the Esc[ or Esc] command,
or with VINST) and used exactly like macro keys. See MACRO KEYS.
KEY DEFINITION FILES (AltU) - These files save sets of macro key or function
key definitions, and should be given file types of ".VDK" and ".VDF",
respectively. You can load any key file, along with your text file(s) to
edit, from the command line (see SYNTAX).
AltU can be used while editing: it will ask whether you want to
"L"oad or "S"ave such a file, then prompt for the name of the file. The
filetype MUST be ".VDK" or ".VDF", and will determine whether MACRO or
FUNCTION keys are affected. If you load such a file, those definitions
will replace any previous ones. If you save, the current definitions will
be written to the file. [Key files can also be created or installed as
defaults in your copy of VDE, using VINST.]
MACRO DEFINITION AND USE (Esc[,Esc]) - To DEFINE a macro, type Esc[. You
will be asked for the macro definition; then, whether to Use or Store it.
(On storing, see MACRO and FUNCTION KEYS.) You may want to plan the macro
first with pen and paper. If you Use the macro, you need to decide
whether you want it to repeat (and if so how many times), and whether you
want to watch it happen or not.
VDE asks "Make Quiet, No-repeat?" Reply "Q" for Quiet
(fast) operation, or press [Ret] for visible (slower)
execution. (The "N" option is intended for storing keys,
but can also be typed here to skip the next question.)
VDE asks "Repeat count?" Type the number of times to
execute (0-254), or just [Ret] for 1; or "*" to repeat
indefinitely.
Normally, you can see the results as the macro executes, and you can
abort it at any time by pressing [Esc]. If you choose to speed up macro
execution by specifying "Q"uiet mode, only the header will be updated as
the macro runs. (Don't do this if the macro concludes by requesting user
input -- the necessary prompts would not display!)
Macros will stop if an error occurs; the error message will be
visible, and can be cleared by pressing Esc. Many commands (like Find or
Reformat) are designed to generate errors at the end of the file so that
an indefinite ("*") macro containing them will halt there. Other indef-
inite macros may need to be aborted manually. (Exception: Esc$ can change
error handling. See MACRO PROGRAMMING.)
Once defined, a macro can be re-used with the Esc] command, which
again gives you the options to Use or Store the previously defined macro.
EXAMPLES: Note -- for clarity, macro examples will be given here as
they function, not as they are typed in; remember that you will need to
add ^P prefixes for certain control keys ([BkSp] (^H), [Ret] (^M), ^J, ^X,
^U, ^P). Keystrokes are often separated by spaces for clarity; the "_"
symbol is used to represent an actual space character typed.
1. Reformat an entire file: after Esc[, just enter
^B
Specify Quiet and indefinite repeat as options ("Q,*").
2. View a file by scrolling slowly through it:
Esc; ^C
This pauses, then scrolls down. (Again, repeat with "*".)
3. Macros are quite powerful. Can you figure out what
this one does, if entered with indefinite repeat "*"?
^QR ^QF(^J ^G ^KB ^QF)^J ^G ^KK ^QC [Ret] ^KV
(It takes all phrases in parentheses out of a file, making
a list of them at the end of the file.)
TECHNICAL NOTE: Ordinarily macros are completely self-contained, and
NEVER request input from the keyboard while executing. There is one
exception: using AltR to run a program from a macro is tricky. Input
while in the program or shell must be typed by you. (VDE resumes control
only when the program ends.)
MACRO KEYS (Esc0...Z) - Both the Esc[ and Esc] commands also give the option
of Storing the macro definition to a key. Up to 36 of these can be stored
on keys 0...9,A...Z; they can then be called up with two key-strokes. (48
more can be stored on IBM function keys; see FUNCTION KEYS.) Example: if
stored to key 3, a macro can be reused simply by typing Esc3.
VDE asks "Make Quiet, No-repeat?" Reply "Q" for a key
that executes in Quiet (fast) mode, without asking for a
repeat count; or "N" for no repeat, with visible execution.
Press [Ret] for a key that executes just like the "use
macro" option, asking for a repeat count first.
VDE asks "Store to key?" Press the desired key: a
number 0...9 or letter A...Z for a Macro key (Esc0...Z), or
a Function key like [F3], Alt[F9], etc.
Again, don't choose "Q"uiet for a key that will request input from you.
There is a total of about 974 bytes available for all 36 keys, and a
128 byte limit for any one key. (VDE's own input line is of limited
width, but VINST can handle up to the full 128.) Trying to use an
undefined key results in an error. You can delete a key definition by
entering an empty macro string (Esc[, [Ret]) and storing it to the key.
Keys defined with Esc[ or ] last only during the current editing
session (VDE.COM itself is not modified). [VINST lets you install
definitions permanently; see DEFAULT MACRO KEYS.]
EXAMPLES: Keys are useful for storing a frequently repeated phrase;
"EscW" is much more convenient than "World Wide Widgets Ltd. (N.A.)". You
might also use several for sets of margins, like: ^OL 5 [Ret] ^OR 60
[Ret]. A key defined as ^QR ^N AltD ^OF would place the current date at
the top right of a letter. Many VDE users set up a macro key to produce a
personalized letterhead: for example, the macro
^N John Doe ^OC ^N 123 Main St ^OC ^N City, State ^OC
will insert that three-line address, neatly centered. You can add print
effects (bold, italic) to suit your taste. For a solid line separating
this from the body of the letter, try adding
^N ^PS ^OF ^E ^V ^PS ^V ^X
Macro keys can be used to create powerful new commands, for example:
^D ^A ^KB ^F ^KK will mark the current word as a block. And, similarly,
^QS ^KB ^X ^KK will mark the current line as a block.
Macro keys can also effectively change the way VDE commands behave.
For example, the Cut (AltC) command does not remove the cut text from the
file; but if you wish it did, you can set up a command that does: just
define "EscC" as a macro key consisting of AltC, ^KY.
MACRO PROGRAMMING (^F Esc; Esc0..Z Esc! Esc=,~ Esc$ Esc() Esc+,- Esc&) - VDE
has several commands that operate only within a macro definition, and give
you conditional control over the execution of a macro, allowing real
programming.
^F, entered as part of an input string, will be replaced by the
current filename when the macro executes. This can be useful to refer to
the current file when running compilers and file utilities. Thus, if you
define the macro
AltR compile ^F /g /r1 [Ret],
the ^F embedded in the string will be expanded, so that the DOS command
executed by AltR will actually be something like
compile C:\PGM\MYPROG.C /g /r1.
Esc; (Esc-semicolon) gives a brief pause before macro execution
continues, presumably so the user can see what's happening on screen.
Esc0...Z, when placed IN a macro, function simply as local "labels"
0...Z. They have no effect, but can be "jumped" to by other commands.
Esc! followed by 0...Z is a "jump" instruction, causing macro
execution to resume with the command following that label. Example: Esc!2
jumps to label 2. As two special cases, Esc![ jumps to the beginning of
the macro, and Esc!] jumps to the end (exits).
Esc= and Esc~ perform tests on the character at the current cursor
position. There are two ways to use them:
(1) Followed by a character, then a label 0...Z (or
"[","]" for start or end), they are conditional jumps: they
jump IF the character does (or for "~", does NOT) match the
one specified. Example: Esc~^M2 jumps to label 2 if the
current character is NOT a CR.
(2) Followed by a character, then ">" or "<", they are
search loops. They will continue to move the cursor right
(or for "<", left) as long as the character at the cursor
does (or for "~", doesn't) match, or until the beginning or
end of the file. Example: Esc=_> moves right as long as the
current character is a space (so it stops on a NONspace).
If you program an endless loop, you will at some point have to abort
by pressing Esc.
Normally, a macro aborts when an error occurs. With Esc$ you can
instead specify a label where execution should continue. Thus, after the
command Esc$E, any command resulting in an error (like "not found") will
cause a jump to label E, ignoring the error.
Several commands allow the use of a counter variable. Esc() sets the
value: for example, Esc(0) initializes it to zero. The Esc+ command
simply increments the value; Esc-(minus) decrements the value, then jumps
if it is zero to a specified label. (In addition to a number, you may use
"[" or "]" for the start or end, or "@" to avoid jumping entirely.)
Example: Esc-] decrements the counter, jumping to the end (exiting) if it
reaches zero; Esc+@ simply increments it.
Esc&, followed by 0...Z, is used to "chain" to another macro key. In
this way you can build up strings longer than the 128-byte limit on any
one key. This is a "jump", not a "call"; there is no returning. Example:
Esc&M causes key M to execute. (You cannot chain to function keys.)
Don't make macro programs Quiet until you're sure they work.
EXAMPLES: 1. Here is a good macro program (best stored as a Quiet
key) to move the cursor to the start of the current sentence:
Esc~.1 ^S Esc1 Esc~.< ^D Esc=_2 Esc=^M2 ^S^S Esc!1
Esc2 ^D Esc=_2 Esc=^M2
You could explain this in programmer's pseudo-code as:
If not "." goto label1 ;move left if already on period
Move left
label1: While not "." move left ;move left to previous period
Move right ;move right to following character
If " " or ^M goto label2
Move left twice ;skip over a period if it's not
Goto label1 ; followed by a space or return
label2: Move right ;okay, now move right as long
If " " or ^M goto label2 ; as you see a space or return
(all done)
2. A macro to move to the start of the current paragraph:
^QS ^S^S Esc=_[ ^D^D
3. If you have some text that you can't reformat because every line
ends in HARD CRs, here is a macro that will "soften up" one paragraph's
worth, leaving just one HARD CR at the end:
^QS ^X Esc=_] Esc=^M] ^S ^V_^V ^D Esc![
4. A macro to match parentheses. Many programming languages use
nested sets of parentheses, for example "{}" in C. This program, when the
cursor is placed on an open bracket "{", will move ahead to find the
closed bracket "}" that matches it:
Esc~{] Esc(0) Esc1 Esc~{2 Esc+ Esc!3
Esc2 Esc~}3 Esc-]
Esc3 ^D Esc!1
TOGGLE CONTROL (Esc*) - "Toggle" commands can create difficulties when used
in macro and function keys: ^V, for example, toggles insert mode. But
when you plan a macro key, you don't necessarily know how Insert will be
set when the key is used! So if you use ^V in the macro, you don't know
whether you just turned it off or on; you might be overstriking or
inserting, and can't tell.
The Esc* command provides a solution, by letting you specify exactly
what state you want for each toggle. Esc* must be followed by a LETTER to
identify a toggle, UPPERcase to turn it ON or LOWERcase to turn it off.
(Insert and Justify each have a third state, as well.) For example, Esc*i
will set INSERT OFF, regardless of its previous state. The toggles are:
Autoindent (^OA) 'a'=off 'A'=on
Doublespace (^OS) 'd'=off 'D'=on
auto Format (^OM) 'f'=off 'F'=on
Hyphenation (^OH) 'h'=off 'H'=on
Insert (^V) 'i'=off 'I'=on 'W'=word
Justification (^OJ) 'j'=off 'J'=on 'R'=remove
Proportional (^OK) 'p'=off 'P'=on
Varitab (^OV) 'v'=off 'V'=on
Once you've used one of these you can revert to the usual commands (like
^V), if you prefer, because you WILL now know the toggle setting.
NOTE: Previous versions of VDE handled this problem
for Insert mode (alone) by turning insert OFF automatically
before running any macro. This is no longer the case.
RECORDING MACROS (Esc") - As an alternative to composing macros and using the
Esc[ command to type them in, you can simply record a macro as you go
about a task. Press Esc" to activate recording; type away; then press
Esc" again to conclude. You will then be asked whether to use or store
it, etc (see MACROS). No confusing ^P prefixes are needed, and you can
take advantage of the full 128-key macro length. While recording, a quote
mark (") will be visible in the upper right (prefix) area of the header,
if the header is displayed.
Note: Function and macro key commands themselves will not work while
macro recording is in progress.
====================================[end]=====================================